Contact us: (860) 379-8553, Toll Free (866) 333-6337
Availability:In Stock
White Hoof Felt 17"X19" - 1 Sheet
White Hoof Felt 17"X19" - 1 Sheet
| Product id | 7484035009 |
| vendor | NEFS |
$155.00
$14.12
$24.26
$13.88
$16.75
$27.95
$4.02
Cubitron belt is said to have the "best life and performance". Cubitron cuts faster and cooler with the added bonus of lasting much longer then conventional zirconia & ceramic belts. Aggressive grind. 36 Grit.
Ceramic (Red) has a longer life for grinding metal than aluminum oxide or zirconia belts. An aggressive grind, commonly used for grinding shoes. 40 Grit
Zirconia (Green) is a particulate material that lasts longer than aluminum oxide belts. These belts have a 3M coolant coating on them. 40 Grit for aggressive grinds, 80 Grit for mid-range grinding, and 100 Grit for tool polishing/finishing.
Aluminum Oxide is often used for tool maintenance, finishing, and polishing. 180 grit or 220 grit.
$234.08
10" Expander wheel speed is phenomenal, takes off material very quick with less heat buildup. Belts are about 2"x32"
$5.27
We offer 3 materials and 4 grip options for our 2" x 36" multitool belt.
Cubitron belt is said to have the "best life and performance". Cubitron cuts faster and cooler with the added bonus of lasting much longer then conventional zirconia & ceramic belts. Aggressive grind. 36 Grit.
Ceramic (Red) has a longer life for grinding metal than aluminum oxide or zirconia belts. An aggressive grind, commonly used for grinding shoes. 40 Grit
Zirconia is a particulate material that lasts longer than aluminum oxide belts. These belts have a 3M coolant coating on them. 40 Grit for aggressive Grind, 80 Grit for mid-range grinding, and 120 Grit for tool polishing/finishing.
$3.15
$4.60
$6.10
$5.20
We carry cubitron and zirconia 2"x48" belts.
Cubitron belt is said to have the "best life and performance". Cubitron cuts faster and cooler with the added bonus of lasting much longer then conventional zirconia & ceramic belts. Aggressive grind. 36 Grit.
Zirconia is a particulate material that lasts longer than aluminum oxide belts. These belts have a 3M coolant coating on them. 36 Grit for aggressive grinds, 40 Grit for aggressive grinds, 60 Grit for mid-range grinding, and 120 Grit for tool polishing/finishing.
$257.78
The 3rd Millennium apron has quality leather padded patches. It has four knife pockets and two nail magnets. This apron also has an extra long adjustable belt with a buckle, featuring a padded back support. It is double layered on the thighs for extra protection.
Available in short or long.
(Replacement parts available. Please call for availability)
Lengths: Short- 25"
Long- 29-1/2"
$4.00
The 6" expander wheel is an economical choice for grinding applications. Quick and easy to grind shoes, shape metal and maintain tools. Belts are 2"x19"
$3.93
$7.82
$2.60
$55.55
$49.20
$55.40
The ACR Rolling Torsion Shoe provides optimum protection for both the bars and sore of the hoof. This shoe is particularly recommended for horses that are hesitant on hard footing. The rolling toe relieves pressure on the deep digital flexor tendon.
The wide web means the shoe is very strong and subject to little distortion from wear. Its 12 mm thickness increases the roller effect and reduces collateral movement effort
$70.60
The ACR Full Rolling Shoe facilitates anterior and collateral lever arms, reducing collateral and joint stress.
It is intended for distal and proximal interphalangeal arthritis and can be positioned using an Equi-thane net and silicone, which absorb impacts and limit the degree of penetration in the soil which improves the rolling effect.
$69.20
The ACR Full Rolling Onion Shoe facilitates anterior, posterior and collateral lever arms, reducing collateral movement efforts on proximal, distal and collateral ligaments.
The shoe provides comfort for sensitive heels, increases the contact area for the rear part of the foot and decreases the heel's sinking on soft ground.
Recommended for distal and proximal interphalangeal arthritis.
$82.65
$49.20
The ACR Straight Bar Shoe restores hoof balance upset by distortion of the coronet and the height of the hoof wall. It is very effective for overlapping or contracted heels.
This shoe enables an optimal, uniform contact area to be maintained on soft ground, even when such contact has been eliminated to treat hoof cracks. The differently turned medial and lateral branches optimize the fit.
This shoe limits how much heels sink into the ground and protects the rear part of the foot.
$56.20
The ACR Egg Bar Rolling Sport Shoe limits how much the heels sink into the ground and increases the posterior lever arm.
The rolling toe facilitates breakover and decreases pressure on the deep flexor tendon. The difference in bend between the medial and lateral branches optimizes the fit.
The wider web and fine punched nail holes at the toe make it possible to set the shoe well back whilst maintaining optimal nailing.
$60.50
The ACR Heart Bar Shoe provides excellent support for the frog by spreading pressure more widely. Its widely spaced nail holes let you free the toe by nailing the quarters.
It provides a large contact area and optimal support for the third phalange.
The quarter clips provide wall support if the toe is cut away.
The tight heel bend is ideal for the laminitic foot's typical shape and facilitates application; the split in the heart bar allows adjusts to the heel-to-heel distance.
$10.00
$7.20
$8.25
Anvil Brand Toe Weights are either Die A or Die B.
Anvil Brand Die A Toe Weights are a square toed hind shoe for gaited horses. Available punched or blank.
The Anvil Brand Die B is a weighted shoe for gaited horses that can be used interchangeably as a front or hind shoe but are labeled as "Front" on our website for simplicity. Available punched or blank.
$8.50
Anvil Brand Die A Toe Weights are a square toed hind shoe for gaited horses.
Limited stock.
Hind only.
Blank only.
$8.20
Anvil Brand Toe Weights are either Die A or Die B.
Anvil Brand Die A Toe Weights are a square toed hind shoe for gaited horses. Available punched or blank.
The Anvil Brand Die B is a weighted shoe for gaited horses that can be used interchangeably as a front or hind shoe but are labeled as "Front" on our website for simplicity. Available punched or blank.
$8.70
$11.20
$26.10
Anvil Brand Die 3 is a steel clipped draft shoe.
Thickness: 3/8"
Punched for 8 regular nails.
$8.20
$8.25
$13.05
$8.05
$7.80
$13.80
Anvil Brand Keg Draft shoes are available in front or hind pattern with a thickness of 3/8". Unclipped. Punched for 8 regular nails.
$14.55
The 16 oz. Anvil Brand National Show Horse toe weight is a front shoe.
13" is 3/8" x 1" punched for 6 Regular nails.
14" is 3/8" x 1" punched for 8 Regular nails.
15" is 5/16" x 1" punched for 8 Regular nails.
$35.25
$7.90
Replacement handles for Anvil Brand Driving Hammers are available in 2 sizes, 1 size is suitable for the 14 oz driving hammer, the other is for 8, 10, or 12 oz driving hammers.
$4.65
Savedge Anvil Devel is a cutting tool made from a triangular file. 3 cutting edges.
**MUST BE USED ON A FLAT SURFACE OR IT WILL CRACK**
$24.50
$24.45
$220.00
Baby Cobra is a compact one cubic foot box designed for easy access to your tools. The top of the box is a nail tray then there are two slanted shelves to keep your tools handy and in place. The base of the box is also space for more equipment or holding shoes.
Box height: 15"
Height w/ handle up: 19"
Width w/ rasp holders: 16"
Nail tray: 12"x4"
Two slanted trays: 12"x10"
Bottom of box: 12"x12"
Weight: 11 lbs
$8.56
$529.25
$456.80
The Baldor 1/2 HP motor is sold with no attachments to allow you to customize your own setup to your needs and preferences. The expander wheels, multi-tool and belt sander attachments will mount with no additional adapters. 3600 rpm, 120v.
$1,011.50
$22.10
Bandsaw Blade 44-7/8" is for portable bandsaw machines.
Width: 1/2"
Thickness: .020"
Teeth: 10-14
